Model Number

CPLD2410

CPU
    * Samsung S3C2410A, mainfrequency:203MHz

External memory storage
    * EMS Memory: 64M byte
    * NOR Flash: 32 bit 32MB(intel nor flash, to which the operating system such as Wince can be installed)
    * NAND Flash: 64MB(K9F1208)(In case the nor flash is not available, the nand flash can support the self-drive, so that the cost can be saved, and the besetment that using 2M nor flash to install the boot can be taken out.

Serial Port
    * Can be set by softwares to be two 5-wire serial ports or one 5-wire serial port and two 3-wire serial ports

Network interface
    * 10M network port, CS8900Q3

USB interface
    * One USB HOST(USB 1.1  protocol) interface
    * One USB Device(USB 1.1  protocol) interface(which can be set to be the second USB Host interface by adjusting the wires or modifying the driver.)

Audio interface
    * adopts the IIS UDA1341 stereo code chip.
    * One binaural stereo audio output
    * One binaural MIC audio input
    * One binaural LINE IN audio input

Memory card interfaces
    * one SD card interface, upper-scale PUSHTOPUSH SD deck

LCD interface
    * supports the TFT LCDs of black-and- white, four-stage grayscale, 256- color 64K color and true color, and the LCD size of 1.5'---12.1',  the resolution of the screen can reach up to 800x600 pixels
    * The standard layout is the Topsun Taiwan 24 bit true color 3.5' TFT with touch screen. Or the Sharp 16 bit 3.5' TFT with touch screen.

VGA interface
The mother board can be directly connected to the PC CRT display or LCD, operated with USB mouse

AD converted input interface
SPI and IIC interface
JTAG debugging interface
    * One 20pin Multi-Ice standard JTAG interface, supports the debugging such as SDT2.51, ADS1.2

CPLD programming interface
    * EPM3032 chip.

Expansion GPRS interface
    *  including 3.3V PWL serial port, SPI interface, IO pins, power source,etc.

Special interface for expansion CDMA
    *  including 3.3V PWL serial port, SPI interface, IO pins, power source,etc.

IDE interface
    * through which IDE harddisks can be connected, driver required.

Bus expansion interface
    * through which some other device chips can be linked for research.

Clock sourse

    * inner real timer, with lithium battery, re-chargable function test?
Reset circuit
    * one reset key, special two-circuit reset chip adopted, stable and dependable

Power interface
    * +5V switching mode voltage stabilizer, with power switch and indicator light.

Debugging&downloading interface
    * One JTAG-interface download line with two standard interfaces(14pin/20pin), supports the debugging such as SDT2.51, ADS1.2
    * One standardMV CPLD download line
    * Five keys, of which the function can be self-defined.
    * One 5V switching power, European standard adapter accepted
    * One cross-over Ethernet cable, which is used to connect the PC and the development board. Machine pressed.
    * One 2-3 transformational serial port debugging line. Machine pressed.
    * One parallel port extension line, used for JTAG debugging.  Machine pressed.
    * One USB line, used to download programs. Machine pressed.


Enclosures list

    * One development board
    * One 5V2000mA power source
    * One Serial port line
    * One parallel port line
    * One USB line
    * One cross-over ethernet cable
    * One CPLD download line
    * One ARM_JTAG download line
    * Two Cds, which contains BSPs, English manuals, schematics, datasheets

For more products information, please visit our website: