The MONO2410 offers 16/32Bit processing power using SAMSUNG's S3C2410. The core module design is reduced to the smallest footprint possible by maintaining a 2.0mm pin connector. The development board comes with a standard IDE connector which makes it possible to connect standard 2.5" IDE hard drives directly. Its an ideal choice for data recording/processing of huge amounts of data. It can be used on places where before a notebook or expansive Intel based solution has to be used.

The pin connectors makes it possible to include it easily into your own layout without using SMD connectors.

• 135 x 169 mm (Application Board)
• 58 x 36 mm (Core Board)

• -20~70 degree Celsius

• +12V

• Samsung S3C2410A (up to 266+ MHz)

• 64Mbyte NAND Flash
• 32Mbyte SDRAM (16 bit)

• One 41pin LCD Display interface (STN or TFT) (supporting resolution up to 1024 x 768)

• One 10MBit interface (CS8900)

• In/Out
• Mic jack

• Three serial ports available through 14pin (2.0mm space) interface

• One USB Host and one USB Device

• Battery backed

• One 20pin standard JTAG interface

• Four Status LEDs

• One Reset Button
• Four User defineable Buttons

• avail able

• IDE44 port for 2.5" hard disk Device support
• One SD/MMC card socket

• One MONO2410Board (including the CPU board and the expansion board)
• One Serial cable
• One Ethernet cross-cable
• One USB cable
• 12V Power adapter (European standard)
• One CD/DVD with product reference
• CD Contents Software (Embedded Linux/WINCE BSP) user manual , schematics, datasheets